5-2 Identifying M2B Controller Panel Components
Screen Displays
SET POINT Numeric LED
During normal operation, the SET POINT LED on the controller displays the process set point you want the unit to maintain. It also displays parameter and
PROCESS Numeric LED
During normal operation, the PROCESS LED on the controller displays the actual process temperature at the To Process thermocouple. It also lists parameter symbols during setup and error messages if an error occurs.
Status Indicators
RUN Indicator
The RUN indicator is on during normal operation and flashes during the
HI HEAT Indicator
The HI HEAT indicator is on when fluid heaters are at 100% capacity to rapidly raise fluid temperature.
LO HEAT Indicator
The LO HEAT indicator is on when fluid heaters are at 50 percent capacity.
COOL Indicator
The COOL indicator is on when fluid temperature is above the set point and is being cooled.
Display Indicators
TO PROCESS Indicator
The TO PROCESS indicator is on when the PROCESS LED screen on the controller displays the temperature of the outgoing fluid.
6017 Series Hot Oil Large Temperature Control Units | Page 35 |
