Sterling SDA 1000-5100 Lit when Control Output 1 is on. The Out1, Indicator Name Description

Identifying Process Air Temperature Controller LED Indicators

Indicator	Name	Description
PV	Process Value	During normal operation, the process value (PV)
	Numeric LED	numeric LED indicator displays the process
8.8.8.8
		temperature at the To Process thermocouple. It
		also lists parameters during setup and error
		messages if any errors occur.
SV	Set Value	During normal operation, the set value (SV)
	Numeric LED	numeric LED indicator displays the process set
8.8.8.8
		point temperature selected for the dryer. The dryer
		then maintains this set point temperature. This
		LED indicator also displays parameter and pre-set
		function values during configuration setup.
OUT1	Out 1 LED	Lit when Control Output 1 is on. The Out1
		indicator lights when the controller signals the
		process heaters to be energized.
OUT2	Out 2 LED	Lit when Control Output 2 is on. Not used in
		this application.
AT	AT LED	Flashes during auto-tuning in process value (PV)
		screen.
Indicator	Name	Description
ALARM1	ALARM 1 LED	Lights in the Operation Indicator Section when
		the output function assigned to auxiliary output
		1 turns on. The ALARM1 indicator lights when
		the process temperature falls below the set point
		temperature by more than the alarm deviation
		value. Advisory alarm does not interrupt operation
		of the dryer.
Indicator	Name	Description
ALARM2	ALARM 2 LED	Lights in the Operation Indicator Section when
		the output function assigned to auxiliary output
		1 turns on. The ALARM2 indicator lights when
		the process temperature exceeds the set point
		temperature by more than the alarm deviation
		value. Alarm output de-energizes the heaters.
		Heaters re-energize when the temperature falls
		within the acceptable range.

Large Dehumidifying Dryers Controls 28