On, Off | Sterling SDA 1000-5100 instruction

Entering Operating Parameters to Select Modes

To enter the display:

1.Press the Mode Display key to view the Run/Stop & Alarm 1 Modes.

2.Press and to set the higher or lower the values of the parameter or turn that function On or Off.

The SV readout displays the different values for the parameter within a mode.

3.To switch modes within a level, press and hold the Level Display key for one (1) second.

The PV readout will display the different parameters within each mode.

4.Use short presses on the Mode Display key to display each parameter within a mode.

The SV readout displays the different values for the parameter within a mode.

5.Press and to set the higher or lower the values of a parameter or turn that function On or Off.

6.Press Level Key once to return to the Process Temperature Setting.

Figure 12: Settings for Process Temperature Controller (E5CN), Part No. A0555757

	Mode	Parameter	Setting range	Default	Manuf. setting
	Operation	Run/Stop	Run/Stop	Run	-
	Operation	Alarm value 1	-1999 to 9999	0	25
		Alarm value 1	-1999 to 9999	0	25

Mode	Parameter	Setting range	Default	Manuf. setting
	AT execute/cancel	ON, OFF	OFF	?
Adjustment	Temperature input shift	-199.9 to 999.9	0.0	-
Adjustment	Proportional Band	0.1 to 999.9	8.0	?
	Integral Time	0 to 3999	233	?
	Derivative Time	0 to 3999	40	?

Large Dehumidifying Dryers

Controls

31

Image 31

Sterling SDA 1000-5100 specifications Entering Operating Parameters to Select Modes, On, Off

Contents

SDA Large Dehumidifying Dryers With AP0 Controls If the Shipment is Not Complete Shipping InfoUnpacking and Inspection Event of Shipping Damage Returns Warranty ReturnsCredit Returns Table of Contents Operation Dryer Identification Serial Number Tag Technical Assistance How to Use This Manual SafetySafety Symbols Used in this Manual Wear Safety Glasses and Work Gloves Dryer Safety Tags Description General Responsibility ResponsibilityOperator Responsibility Maintenance Responsibility Reporting a Safety Defect Models Covered in This Manual Functional DescriptionGeneral Description Regeneration Cycle Process/Regeneration Cycle Sequence of Operation Controller Screen Descriptions Controller Description Mechanical Features Standard FeaturesElectrical Features Closed-Loop Regeneration OptionsProcess Aftercooler Process Air Dust Collector Recommended Temperature SettingsMaterial Overdrying Protection Electrical Options Mechanical Options Fail Safe Operation Safety Devices and InterlocksSafety Circuit Standards Safety Device Lock-OutsPage Making Electrical Connections Mechanical InstallationUncrating the Equipment Rigging and Placing Unit Checking Blower Rotation Checking for Proper Blower Rotation Dryer/Drying Hopper Process Air Connections Making Dryer/Drying Hopper Process Air Connections Aftercooler Components & Flow Rates Connecting Aftercooler/Precooler Cooling Water Optional Drying Hopper Air Trap Using the Drying Hopper Air Trap Controls SwitchesIndicator Lights Process Air Temperature Controller Lights in the Operation Indicator Section when Lit when Control Output 1 is on. The Out1Lit when Control Output 2 is on. Not used Indicator Name Description E5CN Operating Parameters Setting the Process Air Temperature Tuned prior to dryer startup Adjustment Level Indicator Name Description ON, OFF Entering Operating Parameters to Select Modes Process Air Dew Point Display Setting the High Dew Point AlarmOptional Setting the Redundant Safety Controller Redundant Safety Controller DisplayWatlow Operating Parameters Manf. setting Pre-Startup Checks Auto-Tuning the DryerOperation Initial Start-up Dryer Operation Procedures Page Material Miser OFF Press + to Enable Alarm Display Messages Shutting Down the Dryer Auto-Tuning the Dryer Maintenance Schedule MaintenancePhotocopy this page for your maintenance records Cleaning or Replacing the Process Air Filters Preventative Maintenance Calibrating the Dirty Filter Alarm Cleaning or Replacing the Regeneration Filter Checking the Dewpoint Control System Symptoms of Worn Out Desiccant Corrective MaintenanceReplacing the Desiccant Replacing the Process Heater Electric Dryers Desiccant Tower Assembly Replacing the Regeneration Heater Electric Dryers Process Heater Box Assembly Regeneration Heater Box Assembly Basic Troubleshooting TroubleshootingIntroduction Large Dehumidifying Dryers Troubleshooting Alarm Descriptions AlarmsAlarm Alarm Description Alarm Effect Code Using a Thermocouple Determining Temperature Controller Errors or Sensor ErrorsUsing a Platinum Resistance Thermometer Appendix Warranty Aftercooler Design Specifications Technical SpecificationsAnnex B Information Drawings and Diagrams Optional dryer dust collector Spare Parts List Level 3 Mechanical Components Located on back of Dryer Dryer Identification Serial Number Tag Parts and Service Department Sales Department Service DepartmentTechnical Assistance Parts Department