Identifying Temperature Controller Keys
Indicator | Name | Description |
|
|
|
| Mode Key | Press the Mode key to shift the display to the next |
|
| set of parameters. The menu screen displays. |
|
|
|
| Down Key | Press the Down arrow key to lower the process air |
|
| set point temperature. During setup, it lets you |
|
| decrease the value of the parameter displayed on |
|
| the set point LED readout. |
|
|
|
| Up Key | Press the Up arrow key to raise the process air set |
|
| point temperature. During setup, it lets you |
|
| increase the value of the parameter displayed on |
|
| the set point LED readout. |
|
|
|
Setting the Process Air Temperature
When setting the process air temperature, consult with the resin manufacture for the recommended drying temperature.
To change the process air temperature set point with the dryer running:
Press 
to raise the set point to the temperature you want.
Press 
to lower the set point to the temperature you want.
Restoring the Process Air Temperature Controller (E5CN) to Factory Settings
If the preset parameters on the controller have been tampered with and it no longer properly controls temperature and displays dew point, you can restore the controllers to the factory setup. Call the Service Department for detailed instructions.
E5CN Operating Parameters
The E5CN controller has several mode selections. Within each mode are numerous parameters that can be set.
The factory has set the security level to protect the critical parameters from being accidentally changed. Below is an explanation of the operating modes you will have access to and on the following page are the manufacturers’ default settings.
Large Dehumidifying Dryers | Controls | 29 |
