The AP1 control system can detect and alarm a low material level condition in up to three (3) material hoppers. The material hopper assignments on the display are “Machine Hopper 1,” “Machine Hopper 2,” and “Drying Hopper.” Although your naming conventions may vary, the low material level detection capability of the AP1 can still be exploited. Refer to the provided electrical diagram for the proper wiring of the required level detection hardware.
Low material level detection will not be performed for this hopper.
Low material level detection will be performed on this hopper provided that the dryer is running.
SET CLOCK
(Clock Menu Screen)
This menu allows the operator to set the AUTOSTART CLOCK and the ALARM CLOCK.
The Autostart clock controls the
Use the following procedure to set the Autostart clock:
1.Press the Month field on the Set Clock screen and use the keypad to enter in the current month. Pres the ENTER button to save the value.
2.Press the Date field on the Set Clock screen and use the keypad to enter in the current date. Press the ENTER button to save the value.
3.Press the Year field on the Set Clock screen and use the keypad to enter in the current year. Press the ENTER button to save the value.
4.Press the Hour field on the Set Clock screen and use the keypad to enter in the current hour. Press the ENTER button to save the value.
5.Press the Minutes on the Set Clock screen and use the keypad to enter in the current minutes. Press the ENTER button to save the value.
6.Press the SET TIME button to save the information.
(Autostart Clock Screen)
In this screen the user can set the variables that are used to time and date stamp alarms. This feature works in conjunction with the ALARM screen (see Page 43 ) to notify the user of issues that the dryer had encountered during its operation.
Large Dehumidifying Dryers | Controls | 45 |
