Sterling SSE-5 BL operating instructions Mounting onto mixing hoppers with lateral inlet

SSE 5 BL

8.4. Mounting onto mixing hoppers with lateral inlet

A material hopper VT 2,3/70/VT2,8/70 is required: Mount the material hopper onto the swan-neck of the mixing hopper.

Mount the unit onto the intermediate hopper.

Figure 7: VT 2,3/70/2,8/70

FObserve the bearing capacity of the machine flange.

8.5. Mounting onto dosing station DT 30

An adapter piece AD 1/5 is required:

Mount the dosing hopper directly onto the dosing container of the dosing station DT 30.

Mount the unit onto the dosing hopper.

Figure 8: AD 1/5

FObserve the bearing capacity of the machine flange.

Assembly instructions 25