SSE 5 BL

Setting the line clear time

Press the “change-over” key and

then the “arrow key”.

&The line clear time which was last selected appears in the display. 0-99 seconds may be set for the line clear time.

FIf no line clear valve has been installed enter “0".

3.4. Initial conveying operations

Metal shavings may be inside the pipe from cutting down pipes into lengths. These are pulled during the first conveying process and collected in the separator.

FThis material should not be used again.

3.5. Switching off the unit

Disconnect the unit from mains supply by the device plug.

Putting into operation 3-5

Page 19
Image 19
Sterling SSE-5 BL operating instructions Initial conveying operations, Switching off the unit