SSE 5 BL
8.2. Mounting on the processing machine
A material hopper VT 2,3/70 / VT 2,8/70 is required: Mount the material hopper onto the flange of the processing machine.
Mount the unit onto the material hopper.
F Figure 6: VT 2,3/70 / VT2,8/70
Observe the bearing capacity of the machine flange.
8.3. Mounting onto a machine hopper
A welding flange EF 190 or an assembly flange MF 253 is required:
LPlease observe all safety regulations for the operation of welding equipments.
Always wear a safety goggle.
Weld the welding flange into the machine hopper lid. Mount the unit onto the flange.
Or
Mount the assembly flange.
Mount the unit onto the flange.
Figure 6: EF 253
Figure 6: MF 253
Assembly instructions 24
