Sterling STT 800 manual 3.3.2Entering Alphanumeric Values, General Operation, Step, Procedure

General Operation

3.3.2Entering Alphanumeric Values

Mixed input of	With the input of alphanumeric values, digits and letters are mixed.
digits and letters	For the numerical components of the input, proceed as described in section
	3.3.1. If, however, you wish to enter a letter at the current cursor position,
	you must enable the corresponding alphanumeric font. In this instance, you
	move the cursor with activated Shift Lock mode with						and	.
Entering A to F	A to F characters can be entered directly with activated Shift Lock mode
characters	using numeric keys 1 to 6. If you want to enter digits again after the letters,
	Shift Lock mode must be de-activated. To enter the alphanumeric string
	7FEB53, for example, proceed as follows:
	Step			Procedure
	1	Press
				7
	2	Press
			\
		Shift-LED is on.
	3	Press in succession
				6F	5E	2B
	4	Press
			\
		Shift-LED goes out.
	5	Press in succession
				5E	3C

6

Confirm by pressing

\b

02/01GB

OP7, OP17	3
09/96