Sterling Plumbing 7113 Series manual Complete the Installation, Removing the Apron Panel, Sterling

7. Complete the Installation

Tabs

Languettes

Lengüetas

Clips/Clips/Clips

Apron Frame

Cadre du bandeau

Estructura del faldón

Apron Panel

Panneau du bandeau

Panel del faldón

CAUTION: Risk of property damage. Make sure that a watertight seal exists around the drain and overflow.

NOTE: If you have not already done so, remove the apron panel following the instructions below.

Removing the Apron Panel

Insert a flat-blade screwdriver or other prying tool into one of the two screwdriver slots.

Use the screwdriver to pry the bottom clip out and release the clip.

When all bottom clips are released, pull the bottom of the panel away from the apron to release the remaining clips.

When the bottom of the panel is clear, lower the panel until the top of the panel is clear.

Complete the Installation

Connect the drain to the trap according to the drain manufacturer’s instructions.

Install the faucet trim, bath spout, shower door, and any accessories according to each manufacturer’s instructions.

Remove the protective covering from the bath.

Open the water supply lines, then run the water to flush out any debris. Close the valves.

Check all connections for leaks.

Sterling 19 1072812-2-A