INSTALLATION INSTRUCTIONS
INSTALLATION
8
AR0360
•Place the front coal between the heat shield and the flame baffle so that its ends sit flat against the burner skin Diagram 9
9
AR0361
•Put five of the round coals on the front between the fingers of the flame baffle.
•Put two rectangular coals behind the first row and at either side to touch the reflector panels, Diagram 10
10
AR0362
•Place four more round coals behind the first row so they sit on the fingers, the two at each side touch the rectangular coals, Diagram 11
11
AR0363
•Put the last three round coals behind the centre row and touching the back panel, Diagram 12
12
AR0364
5.REPLACING THE DOOR
5.1Ensure the rope seal fitted to the rear of the glass frame is intact.
•Use a ceramic glass product generally sold for cleaning ceramic hobs to clean the glass front
•Refit glass frame and tighten screws evenly, Diagram 13
13
AR1909
With the top still supported or removed:
•Refit front by locating in grooves and lowering into place, Diagram 14
12
