USER INSTRUCTIONS
11
AR0364
7. REPLACING THE DOOR
12
7.1 Ensure the rope seal fitted to the rear of the glass frame is intact.
• Use a ceramic glass product generally sold for cleaning ceramic hobs to clean the glass front
• Refit glass frame and tighten screws evenly, Diagram 12
AR1909
With the top still supported or removed:
•Refit front by locating in grooves and lowering into place, Diagram 13
13
AR1908
•Now replace top, Diagram 14
14
AR1907
8.GAZCO FLUE SURE SYSTEM
8.1The stove is fitted with the Gazco Flue Sure System, which will act to cut off the gas supply to the burners in the event of incorrect operation of the flue. If the system acts to cut off the gas supply, this indicates that there is insufficient flue pull. If this occurs a minimum of 10 minutes should be allowed before trying to relight. Continued operation of this safety device means there may be a serious problem with the flue system. A qualified gas engineer should inspect this.
Do not use the stove until an engineer says it is safe to do so.
9.THE FLAME FAILURE DEVICE
9.1This is a safety feature incorporated in all GAZCO fires, which automatically switches off the gas supply if the pilot light goes out and fails to heat the thermocouple.
10.'RUNNING IN'
10.1The surface coating on your GAZCO stove will ‘burn off’ during the first 24 hours of operation on high, producing a harmless and temporary odour. If the odour persists ask your retail for advice.
11.SERVICING
11.1A qualified gas engineer must service the stove every 12 months. In all correspondence, always quote the appliance type and the serial number that may be found on the data badge on the appliance.
12.VENTILATION
12.1Any purpose provided ventilation should be checked periodically to ensure that it is free from obstruction.
13.INSTALLATION DETAILS
13.1To assist in any future correspondence, your installer should have completed this commissioning sheet, this records the essential installation details of this appliance. In all correspondence always quote the model No. and serial No.
14.HOT SURFACES
14.1Parts of this appliance become hot during normal use. It is therefore recommended that a suitable fire guard be used for protection of young children and the infirm. Indeed, all parts of the appliance should be treated as a 'working surface' except for the control touch pad area and access panel.
7