USER INSTRUCTIONS
4.2STANDARD REMOTE CONTROL This remote control can control the gas appliance after the pilot has been lit. It can turn the main burner on and regulate it from low through to high and back again. It can turn the main burner off leaving the pilot burning GAZCO PART NUMBER 8455.
4.3THERMOSTATIC AND TIMER REMOTE CONTROL This remote control can control the gas appliance after the pilot has been lit. In ‘MANUAL MODE’ it can be used to turn the main burner on and manually regulate it from low through to high and back again. It can also be used to turn the main burner leaving the pilot burning. In ‘AUTO MODE’ it will automatically regulate the room temperature to a
5.CLEANING THE FIRE
WARNING: NEVER CLEAN THE STOVE WHILE IT’S HOT.
THE STOVE STAYS HOT FOR A LONG TIME AFTER
SHUTDOWN.
5.1Make sure the fire and surrounds are cool before trying to clean.
5.2REMOVING THE DOOR
For rear flue exit:
•Lift the top of the appliance off and put to one side. For top flue exit:
•Lift and support the top to give clearance, Diagram 3
3
AR1907
•Lift the front upwards until it is clear of the slots
•Pull towards you away from the stove, Diagram 4
4
AR1908
•Remove the glass frame by undoing the frame fixing screws and lifting clear, Diagram 5
5
AR1909
5.3Carefully remove the ceramic fuel bed components and set aside, ensuring you protect the floor coverings and follow the Advice given at the start of Section 6.
5.4The coals do not require cleaning. Do not use a vacuum cleaner or brush to clean the coals, any large pieces of debris can be removed by hand.
5.5Ensure any debris is removed from the burner ports.
5.6Replace the ceramics by referring to Section 6.
5.7Use a damp cloth to clean the outer casing of the appliance.
5
