Studer Innotec HPC7048, HPC2512, HPC4024, HPC5048 user manual Push buttons, Turning Knobs, Inverter

STUDER INNOTEC HP-COMPACT

3		Reserved
4		Program	Program	mode	for Aux.
			Contact
5		Contact active	Auxiliary Contact is activated
6		Contact man-	Aux. Cont. manually activated
		ual
7		TRANSFER	Transfersystem is active. In-			Transfer (bypass) is disabled
			coming voltage is being sent			(see chap. 4.7)
			directly to AC OUT outlet
8		AC OUT	There is a voltage at the AC			The Inverter is in Standby-Mode
			OUT outlet
9		INVERTER	Inverter is working			Forced Inverter Mode (see chap.
						4.5)
10		Over Temp.	For the time being the HP-
			COMPACT is out of service
			because of overheating.
11		Overload	The HP-COMPACT is out of
			service	because	of overload
			or short-circuit
12		Batt. Low/High	Battery voltage is too low			Battery voltage is or was to high
13		OFF	HP-COMPACT is turned off.			HP-COMPACT is for the time
			Turning it back on is only pos-			being turned off. Turning it back
			sible manually.			on will follow automatically !
14		EQUALIZE	Battery equalizing is set
15–18			State of charge of the battery			LED 15 – Absorption time is run-
						ning
25		POWER	Display the value of the output			power in % of Pnom (in Inverter
		MONITOR	Mode) and the charge current in Amps (in Charger Mode). In this
			mode the red LED indicates that power sharing is in use (>100A).
4.3	Push buttons
19		ON/OFF	Turning the HP-COMPACT on and off (Help Button for Program-
			ming)
20		RESET	Alarm Signal off (Help Button for Programming)
21		Aux. Contact	Control Aux. contact (Help Button for Programming)
4.4	Turning Knobs
22		CHARGER	Adjustment for max. Charging Current
23		TRANSFER	Adjustment for Transfer Voltage Threshold (TRANSFER – IN-
			VERTER)
24		STANDBY	Adjustment for „Standby“ system
26		INPUT LIMIT	Must be adjusted to the maximal available current of your AC
			INPUT supply

4.5The Inverter

An Inverter is built in the HP-COMPACT, which generates a sinusoidal alternating voltage of a very high quality. With this Inverter any 230Vac alternating voltage appliance up to the nominal power of your HP-COMPACT can be operated. Thanks to the generous dimen- sioning of the HP-COMPACT, you can operate appliances requiring higher power than the nominal power of the HP-COMPACT for a short time. The HP-COMPACT provides up to 3-times the nominal power to start motors.

User manual HP-COMPACT V3.0 E 13