Manuals / Sub-Zero / Kitchen Appliance / Refrigerator

Sub-Zero ICBBI-36RG, ICBBI-36F GR Ille Remo VAL, ANT I-T IP BRA Cket Installa Tion, 610 m m

Models: ICBBI-36RG ICBBI-36F ICBBI-36R

1 78
Download 78 pages 23.73 Kb
Page 8
Image 8

BUILT-IN INSTA LL ATIO N INSTRU CTI ON S

GR ILLE REMO VAL

In order to prevent damage to the grille and to access the power cord, the top grille assembly should be removed prior to moving the unit.

To remove the grille assembly, pull out on the bottom edge of the grille and tilt it upward. Loosen the back two grille mounting screws and remove the front two grille mounting screws. With the grille held firmly, pull forward to remove. Refer to the illustrations below.

To reinstall the grille, insert the grille into position and be sure that the grille catch tabs are engaged. Reinstall the front two grille screws, then retighten the back two grille screws. Check for proper fit.

ANT I-T IP BRA CKET INSTALLA TION

WARNING

To prevent the unit from tipping forward and provide a stable installation, the unit must be secured in place with the anti-tip brackets shipped with the unit.

IMPORTANT NOTE: Placement of the anti-tip brackets is critical to a stable installation. Failure to properly position the anti-tip brackets will prevent them from engaging the unit.

The two anti-tip brackets must be installed exactly 610 mm from the front of the rough opening to the back of the brackets and a minimum of 102 mm from the sides of the rough opening. This depth will increase to 665 mm for a flush inset installation based on 19 mm deep decorative panels. Proper placement will ensure that the anti-tip brackets engage the anti-tip bar at the back of the unit.

IMPORTANT NOTE: Both anti-tip brackets MUST be used.

WOO D FL OOR AP PL ICA TIO NS

After properly locating the anti-tip brackets in the rough opening, drill pilot holes 5 mm diameter maximum in the wall studs and/or wall plate. Use the #12 x 64 mm PH pan HD zinc screws and #12 flat washers to secure the brackets in place. Be sure that the screws penetrate through the flooring material and into wall studs or wall plate a minimum of 19 mm. Refer to the illustration below.

CONCRETE FLOO R APPLI CAT ION S

After properly locating the anti-tip brackets in the rough opening, drill pilot holes 5 mm diameter maximum in the wall studs and/or wall plate. Then drill 10 mm diameter holes into the concrete a minimum of 13 mm deep. Use the #12 x 64 mm PH pan HD zinc screws and #12 flat washers to secure the brackets to the wall and use the 10 mm–16 x 95 mm wedge anchors to secure the brackets to the floor. Be sure that the screws penetrate the wall studs or wall plate a minimum of 19 mm. Refer to the illustration below.

IMPORTANT NOTE: For either wood or concrete floor applications, if the #12 x 64 mm screws do not hit a wall stud or the wall plate in any of the back holes of the brackets, use the provided #8–18 x 32 mm PH truss HD screws and #12 flat washers with the nylon zip-it wall anchors.

IMPORTANT NOTE: In some installations the subflooring or finished floor may necessitate angling the screws used to fasten the anti-tip brackets to the back wall.

Back Grille

Screw

Front Grille Screw

Grille removal

Grille mounting screws

610 mm

102 mm

MIN

Wood floors

610 mm

102 mm

MIN

13 mm

MIN

Concrete floors

AC CESSO RIE S

Optional acces- sories are available through your Sub-Zero dealer. To obtain local dealer information, visit our website, subzero.com.

8

Page 7 Page 9
Page 8
Image 8
Sub-Zero ICBBI-36RG, ICBBI-36F GR Ille Remo VAL, ANT I-T IP BRA Cket Installa Tion, Woo D Fl Oor Ap Pl Ica Tio Ns, 610 m m
Page 7 Page 9

ICBBI-36RG, ICBBI-36F, ICBBI-36R specifications

The Sub-Zero ICBBI-36R, ICBBI-36F, and ICBBI-36RG are premium built-in refrigerators designed to combine cutting-edge technology with sophisticated aesthetics, making them a perfect addition to any modern kitchen. These models stand out for their impressive capacity, advanced features, and customizable design, ensuring they meet the needs of discerning homeowners and culinary enthusiasts alike.

One of the main features of these refrigerators is their dual refrigeration system. By maintaining separate cooling environments for the refrigerator and freezer compartments, Sub-Zero ensures optimal freshness and preservation of food. This technology helps to reduce the chances of odor transfer between compartments, allowing fruits, vegetables, and other perishables to maintain their flavor and nutritional value for longer periods.

The ICBBI-36R model is designed specifically for refrigeration, while the ICBBI-36F focuses on freezing, and the ICBBI-36RG seamlessly combines both. Each unit provides ample storage space, enhancing functionality without compromising on style. The sleek stainless-steel finish and customizable panels enable integration into any kitchen decor, creating a streamlined appearance that suits high-end designs.

Temperature management is a standout characteristic of these units. Sub-Zero refrigerators are equipped with advanced microprocessor controls that monitor and adjust temperatures to ensure optimal conditions for every type of food. The units also feature air purification systems that filter out contaminants and ethylene gas, which can cause fruits and vegetables to ripen too quickly.

Energy efficiency is another critical consideration in these models. Sub-Zero has incorporated energy-saving technologies that meet stringent efficiency guidelines while still delivering superior cooling performance. These refrigerators use less energy than traditional models, aligning with modern consumers' growing interest in sustainability.

Furthermore, the ICBBI-36 line includes various features designed for convenience, such as adjustable shelving and storage bins, providing ease of organization. The door panel ice maker and water dispenser in the ICBBI-36RG model add an extra layer of convenience for users.

Overall, the Sub-Zero ICBBI-36R, ICBBI-36F, and ICBBI-36RG embody a perfect blend of innovation, style, and functionality. With advanced refrigeration technologies, customizable design, and energy efficiency, these models offer a top-tier solution for preserving food while elevating kitchen aesthetics.