Sub-Zero UC-15IO manual Instal Lati On, In St Al La Ti O N Sp Eci Fi C At I O Ns

S UB -Z ERO ICE MACHINE I NSTALLATION

INSTAL LATI ON

13)Prepare sanitizer solution and sanitize the ice machine according to In Place Cleaning/Sanitizing Steps 6 and 7 on page 25.

Do not cover the kickplate area.

14)Put one gallon (4 L) of cold water into a container that will easily pour under the lifted water shutters. Refer to page 17 to identify water shutters. Open shutters and add one gallon (4 L) of cold water. Watch for proper drainage.

15)Press POWER button.

16)At initial start-up, ice machine will need approximately 30 minutes to freeze ice and up to 5 minutes to harvest the ice. Wait for first cycle of cubes to drop to ensure proper installation.

The unit must be allowed to have ventilation through these fins. The door panel may hang in front of the fins, but a decorative kickplate must not cover the fins.

The kickplate can be painted another color, if you choose. Follow these easy steps:

Rough up surface to be painted with fine grit sandpaper.

Wipe with alcohol to ensure it is clean and dry.

Use an appliance or industrial grade, oil base, high gloss enamel paint.

I NS TAL LATI ON SPEC IFIC ATI ONS	IN ST AL LA TI O N SP ECI FI C AT I O NS
Gravity drain model	Pump model
TOP VIEW	TOP VIEW

DRAIN		SHUT-OFF
DRAIN	WATER	VALVE
TUBE	INLET
	TUBE
1/8" (3)
151/4"min
(387)

OPENING WIDTH

TOP VIEW

WATER
INLET TUBE	SHUT-OFF
	VALVE
DRAIN
TUBE

SHUT-OFF	WATER
VALVE
	INLET TUBE
	DRAIN TUBE
	AIR GAP
	DEVICE
	1/8" (3)
	151/4"min
	(387)

OPENING WIDTH

TOP VIEW

	AIR GAP
	DEVICE
	DRAIN TUBE
	WATER
SHUT-OFF	INLET TUBE
VALVE

FRONT VIEW FRONT VIEW 11