Sun Microsystems 2500 manual Sun Install Check

TABLE 2-1Information for Setting Up the Solaris Desktop Operating System

Setup Window	Explanation and Notes	Your Information
Solaris License	Accept the Solaris Operating System License.
Solaris Release	Choose the Solaris Operating System release.
Select Language	Native language and locale to use for the workstation.
and Locale
Host Name	A name to give the workstation.
Network	Network or stand-alone workstation protocols. A system
Connectivity	administrator might be required to complete this section.
(IP Address)	Note: Depending on how you answer and what
	information is provided by your network, you might also
	be prompted for the workstation’s IP address.
Kerberos Security	Decline or accept and setup Kerberos security.
Name Service	Name service to use: NIS+, NIS, DNS, LDAP, or None.
	Note: This window is not displayed if the workstation is
	not connected to a network.
Domain Name	NIS or NIS+ domain for this workstation.
	Note: This window is not displayed if the workstation is
	not using the NIS or NIS+ service.

Name Server/

Subnet/

Subnet Mask

Name server (specify the server or have the workstation find one on a local subnet).

Note: This window is not displayed if the workstation is not connected to a network.

Time Zone	Local time zone (select by geographic region, GMT offset,
	or a time zone file).
Date and Time	Current date and time (accept the default or enter the
	current date and time).

Sun Install Check

The Sun Install Check tool verifies and provides information about workstation software and hardware configuration. When installed, the Sun Install Check tool occupies 15 MB of disk space.

14 Sun Blade 2500 Getting Started Guide • December 2004