Care and Cleaning

Control Probe

If cleaning is necessary, wipe over with a damp cloth.

Note: The Control Probe must be removed before the frypan is cleaned and the Control Probe inlet must be dried before the frypan is used again.

NEVER IMMERSE THE CONTROL PROBE IN WATER OR OTHER LIQUID.

Store the Control Probe carefully. Do not knock or drop it as this can damage the probe. If damage is suspected, return the Control Probe to your nearest Sunbeam Appointed Service Centre for inspection Refer to the separate warranty and service centre booklet.

High Domed Metal Lid

(FP5500/FP5600/FP5610/FP5700/FP5900/SK4200)

These lids are powder coated. Wash lid in warm soapy water using a soft sponge, rinse and dry thoroughly. Metal scourers will scratch the surface and should be avoided. Some food such as tomato paste and curry may stain the powder coat surface. This staining may be removed or reduced by rubbing with a cream cleanser or a paste of bicarbonate of soda and water.

Note: Do not place metal lid in a dishwasher.

Glass Lid (FP5910)

This glass lid is dishwasher safe.

17

Page 19
Image 19
Sunbeam FP5900, FP5500, SK4200, FP5700, FP5600 manual Care and Cleaning, Control Probe, High Domed Metal Lid, Glass Lid FP5910