Sunbeam LC9000 Fig Fig, Variable slicing blade, Start processing using the START/STOP button

Models: LC9000

1 44
Download 44 pages 32.87 Kb
Page 12
Image 12
Variable slicing blade

Fitting/Using the tools on your Café Series® Food Processor continued

Reversible grating/shaving, shredding and julienne discs

1.Fit the processing bowl and spindle as detailed previously, in figures 1, 2 and 4.

2.Select the 'Reversible' disc of your choice – Shredding (fine or coarse), Grating/Shaving or the dedicated Julienne disc.

3.Fit the disc over the spindle and press firmly into place, see figure 6.

Warning: Use caution as the blades are sharp.

Variable slicing blade

1.Fit the processing bowl and spindle as detailed previously in figures 1, 2 and 4.

2.Fit the slicing disc over the spindle and press firmly into place, see figure 7.

Fig 7

Fig 6

Warning: The variable slicing blade can be used in the large processing bowl only.

Do Not use the variable slicing blade in the small bowl.

4.Fit the processing cover to the processing bowl as previously shown in figure 3 and place the food pusher in the feed chute.

5.Plug the power cord into a 230-240V AC power outlet and turn the power ‘ON’.

6.Start processing using the START/STOP button.

7.When processing is complete, remove the disc and spindle from the processing bowl before removing the processed food.

Warning: Use caution as the blades are sharp.

3.Fit the processing cover to the processing bowl as previously shown in figure 3 and place the food pusher in the feed tube.

4.Plug the power cord into 230-240V AC power outlet and turn the power 'ON'.

5.Start processing using the START/STOP button.

6.When processing is complete, remove the disc and spindle from the processing bowl before removing the processed food.

12

Page 12
Image 12
Sunbeam LC9000 manual Fig Fig, Variable slicing blade, Start processing using the START/STOP button