Sunfire IV manual Main Zone and Zone 2 Menu, Main Zone Menu

CHAPTER 4

Main Zone and Zone 2 Menu

MAIN MENU

TRIMS

MODES

TONE

INPUTS

SETTINGS

36

	SETTINGS
MAIN ZONE
ZONE 2			MAIN ZONE
SPEAKERS
		POWERUP SOURCE		DVD
VIDEO
SOFTWARE		POWERUP VOL MODE		PRESET
CONTROL		POWERUP VOL		-45.5 dB
		MAX VOL		-6.5 dB

	ZONE 2
ZONE 2 SYSTEM		ENABLE
BALANCE		2 LEFT
POWERUP SOURCE		TAPE
POWERUP VOL MODE		PRESET
POWERUP VOL		-45.5 dB
MAX VOL		-6.5 dB

Zone 2 Menu

These settings are like those de- scribed for the Main Zone. In addition, the entire Zone 2 can be enabled

or disabled, and the stereo balance adjusted with this menu.

Zone 2 is set "disabled" from the factory, so you should

use this menu to enable Zone 2 when you are ready to use it.

The Power Up Volume has three options: PRESET, LAST and FIXED. The FIXED option allows you to set the Zone 2 to a fi xed volume, not adjustable with the remote. PRESET and LAST are as described for the Main Zone.

Main Zone Menu

PowerUp Source

This sets the input source which the TGIV will then always select whenever the TGIV is turned on.

Power Up Volume Mode This lets you choose the vol- ume level the TGIV reaches when it is turned on. You can select from a PRESET level, set below (the power-up vol- ume), or it can play at the LAST level it was playing before it was turned off. The TGIV will always turn on at the level set here, but it can be adjusted to any level afterwards.

Power Up Volume

This allows you to set the PRE- SET volume level mentioned above. You might want to set it to a low level to avoid any sur- prises upon turn-on, especially if other users like loud music.

Max Volume

The volume can be set to not exceed a certain level. This is useful if you have sensitive speakers, sensitive neighbors, or you would rather not have others play your system too loud.

User's Manual