Sunfire IV manual Zone 2 Operation, Connections, Indicators, Turning on Zone

Zone 2 Operation

Note: Zone 2 must fi rst be enabled using the OSD (see page 36), or it will not work. Zone 2 can be turned on even if the Main Zone is off.

If you have an amplifi er and a pair of speakers in a second room or area (Zone 2), they can play a stereo source independent of what is play- ing in the Home Theater room (Main Zone). You can also play the same source as selected in the Main Zone.

Zone 2 plays stereo sources, and is unaffected by the Tone controls, DSP, Holographic Image, surround modes or bass management.

Connections

The connections for Zone 2 are shown on page 24.

Note: Zone 2 can play analog sources independent of what is play- ing in the Main Zone. It cannot play from a digital-only source unless that input is selected and playing in the Main Zone. To play a source such as a DVD player in Zone 2 independent of the Main Zone, make sure you connect the player's L-R analog audio output to the TGIV.

Indicators

The front panel has two LEDs to show the Zone 2 status:

In addition to these LEDs, the front panel display will show the input and volume adjustment.

Turning on Zone 2

Use the On Screen Display in the Main Zone to check that Zone 2 is en- abled. (See page 36, middle column for details). This enables the Zone 2 system, but it still has to be turned on.

Press the remote's ZONE 2 button. The remote's POWER, VOLUME and MUTE buttons then work for Zone 2. The remote display changes as fol- lows:

PAGE 1

This allows you to select the inputs to play in Zone 2. Z2MAI (main) allows Zone 2 to play whatever is play- ing in the Main Zone.

Press PAGE to show the next page:

PAGE 2

This has discrete codes which are useful if you want to program the remote control with Macros.

CHAPTER 5

	POWER
SYSTEM	POWER
OFF
MAIN
CD	DVD
TAPE	VCR
AUX	SAT
ZONE2	TV

TGIV CABLE

		AUDIO
PAGE	PAGE
		MAIN	FAV
VOLUME		PREV
		CH
	VOL		CH
		MUTE
MUTE	GUIDE		MENU
	MODE		MODE
TUNER
CONTROLS
	EXIT		INFO
	1	2	3
TUNER	4	5	6
PRESETS	7	8	9
	+10	0
	DIS		ENT
	M1	M2	M3

Zone 2 Power This LED is always on

SIGNAL PROCESSING

DOLBY	ZONE TWO
DIGITAL	POWER

Z2 OFF, Z2 ON Zone 2 on or off.

when Zone 2

DTS

ZONE TWO ADJUST

Z1 Off, Z1 ON

Note: Zone 2 can also be turned

is on. If it is

PRO LOGIC IIx

HOLOGRAPHIC IMAGE

Main Zone on or off.

on and adjusted without using the re- mote. Press the Zone 2 button on the

off, there will be no output

DIGITAL SOURCE

SIDE-AXIS

Z2 BL

TGIV front panel, followed by Power,

to the Zone 2 amplifi er.

POWER

Use these two buttons to adjust the left-right balance of Zone 2.

to turn it on (or off), or adjust the input source or volume.

Zone 2 Adjust

This turns on whenever the Zone 2 source or volume is being changed. Note: if this is on, then any adjustments you make of vol- ume or input, will affect Zone 2, not the Main Zone.

B, C, E, F

These are extra buttons you can Learn over and re-Label with your favorite Zone 2 commands.

Press MAIN to return to PAGE 1, and press it again to return to the Main Menu.

Zone 2 operations will work even if the Main Zone is off.

47

User's Manual