Sunfire IV manual Input Menus, Input Confi guration Menus

CHAPTER 4

Input Menus

Input Confi guration Menus

MAIN MENU

TRIMS

MODES

TONE

INPUTS

SETTINGS

Input Menus

These menus let you select which input you would like to confi gure. Pressing the joystick right on each input brings up a second menu which allows you to confi gure what happens when each input is selected.

INPUTS

Name

Use the joystick up/down, and left/ right to change the display name for any input, up to 9 characters. Move fully left when fi nished.

Gain Trim

Use this to adjust all of your sources to play at similar levels. To prevent overloading, the levels can only be adjusted downwards.

		DVD INPUT CONFIGURE
DVD
CD
	NAME		DVD
SAT
	GAIN TRIM		0.5 dB
VID1
	DEFAULT MODE		LAST
VID2
	VIDEO TYPE		AUTO
VCR
	MAIN ZONE		ENABLE
	FULL AUTO		ON
	TRIGGER RELAY		ON
	ZONE 2		ENABLE

	INPUTS P2
TUNER
TUNER PRESETS
TAPE
PHONO			8-CH INPUT CONFIGURE
8-CHANNEL
		NAME		8-CHANNEL
		GAIN TRIM		0.5 dB
		LOCK TO VID		VID1
		MAIN ZONE		ENABLE
		TRIGGER RELAY		ON

Note: the 8-Channel input menu is slightly different from the other menus:

It allows you to select a specifi c video input whenever the 8-Chan- nel audio input is selected. Also, this input only works in the Main Zone, not Zone 2.

Default Mode

Set the input to a favorite surround mode, or the last mode, or stereo.

Video Type

If you know the type of video used for each input, select the type from CVID (composite), SVID (S-video) or COMP (component). Otherwise, choose AUTO, and the TGIV will automatically detect the source type when a video signal is pres- ent. There maybe some delay in Auto, for certain program material.

Main Zone

Enable/disable the selected input in the Main Zone. You can disable any unused inputs, then it will not play in the Main Zone.

Full Auto

Select on, and the TGIV will turn on and select this input whenever this input starts to play. Use off for any input which hinders auto operation.

Trigger Relay

The Trigger Relay can be set to turn on whenever the input is se- lected. This could be used to turn on an amplifi er or a video screen for example.

Zone 2

Enable/disable the input in Zone 2. You can select the inputs you wish to play in Zone 2. For example, you might disable the Phono input if nobody in Zone 2 appreciates your vintage collection of Swing 78s.

34

User's Manual