Sunfire TGR-401-230 manual Digital Connections, 11. TP1 and TP2, VIA!migo Port, Infrared IR

with its own surround decoder. You can select this as an input from the front panel or remote control. The eight channels of analog audio will then pass into the TGR-401.

Note: if you use HD-DVD or Blu- ray DVD players that have 7.1 analog audio outputs, use this 8- channel input. It is fully processed in DSP with bass management, speaker delays and tone controls. Only the left/right jacks are avail- able in Zone 2.

10. Digital Connections

There are four S/PDIF digital coaxial inputs, with one coaxial output, and four digital optical inputs with one optical output.

Use these with source equipment that has digital audio connections.

11. TP1 and TP2

Optional Olé-2SF Film Interac- tive touchpads are available for external control of Zone 2 or the Main Zone.

These wall-mounted touchpads connect to TP1 or TP2 using stan- dard CAT-5 cable.

Please contact your Sunfire dealer for more information. Use only touchpads that are recom- mended by Sunfire.

Do not connect these ports to Ethernet or other com- puter networks.

12. RS-232 Port

This communications port allows future updates of the software from Sunfire to be made to your TGR-401. It may also be used for control by 3rd party integration systems.

13. VIA!migo Port

This port allows connection of a proprietary VIA!migo iPod dock- ing station system available from Sunfire.

Do not connect this port to Ethernet or other computer networks.

14. Infrared (IR)

These inputs and outputs are used in custom installations to control the Main Zone and Zone 2 from a remote location. The input and output accept 1/8” mono mini-jacks from standard remote control IR equipment, such as those made by Xantech and other companies. There is also a screw terminal output for bare wire con- nections. The remote sensors can be in a different room, or your main room.

15. Trigger Outputs

These allow the TGR-401 to con- trol the turn-on of other trigger-en- abled equipment in your system.

16. IEC Linecord Socket

The TGR-401 comes with a detachable linecord that connects here.

Plug the linecord into an AC wall socket or power strip that is correctly configured with the voltage specified for your model.

CHAPTER 1

17. AC Line Fuse

Always unplug the linecord from the AC Mains before checking or changing the

fuse. If this fuse blows, you must replace it with a fuse of exactly the same size and current rating.

18. Power Switch

If this is switched off, the TGR-401 will be off, and cannot be turned on even with the front panel power switch, the remote control, or optional Olé-2SF touchpads.

In normal operation, leave this switch on. Turn it off if you will not be using the TGR-401 for extend- ed periods.

User's Manual

13