Sunfire TGR-401-230 manual System Configurations, Analog Audio and Composite Video VCR

CHAPTER 2

System Configurations

The following pages show some typical connections that you might make in your installation. They show how the inputs and outputs of the TGR-401 are connected to various audio and video components.

Analog Audio and Composite Video (VCR)

Composite video signal from TGR-401 MON composite video output to TV Monitor's composite video input

Composite video signal
From: VCR video output	Analog audio signals
To: TGR-401 IN1 video input
	From: VCR audio outputs
	To: TGR-401 IN1 L/R audio inputs

VCR Player

When this input is selected from the front panel or the remote control, the VCR’s audio will play in your system and the video is sent to the TV.

As with all the video connections that follow, you must make sure that your TV monitor is set to look at its correct video input or you will not see the picture.

If your TV and other video compo- nents have S-Video connections, use them, as they provide better picture quality than composite video.

User's Manual

15