Sunrise Medical Z-Bop Choose the Right Chair & Safety Options, Adjust Chair to Your Ability

ENGLISH

IV. NOTICE– READ BEFORE USE

A. CHOOSE THE RIGHT CHAIR & SAFETY OPTIONS

Sunrise provides a choice of many power wheelchair styles, sizes and adjustments to meet the needs of the rider. However, final selection of a wheelchair rests solely with you and your health care professional. Choosing the best chair for you depends on such things as:

1.Your size, disability, strength, balance and coordination.

2.Your intended use, and your level of activity.

3.The types of hazards you must overcome in daily use (in areas where you are likely to use your chair).

4.The need for options for your safety and comfort (such as positioning belts or special seat systems).

B.ADJUST CHAIR TO YOUR ABILITY

You need to work with your doctor, nurse or therapist, and your supplier, to fit this chair and adjust the controller settings for your level of function and ability.

C. REVIEW THIS MANUAL OFTEN

Before using this chair you, and each person who may assist you, should read this entire Manual and make sure to follow all instruc- tions. Review the warnings often, until they are second nature to you.

D. WARNINGS

The word “WARNING” refers to a hazard or unsafe practice that may cause severe injury or death to you or to other persons. The “Warnings” are in four main sections, as follows:

1.V — EMI

Here you will learn about electromagnetic interference and how it can affect your chair.

IV. NOTICE – READ BEFORE USE

2.VI — GENERAL WARNINGS

Here you will find a safety checklist and a summary of risks you need to be aware of before you ride this chair.

3.VII — WARNINGS — COMPONENTS & OPTIONS Here you will learn about your chair. Consult your supplier and your health care professional to help you choose the best set-up and options for your safety.

4.XI — BATTERIES

Here you will learn about battery and charger safety, and how to avoid injury.

Q-NOTE–Where they apply, you will also find “Warnings” in other sections of this Manual.

Throughout this owner’s manual and on the wheelchair you will see the icons listed below to identify warnings and potential haz- ards. It is important to read and understand all of them and under- stand them.

WARNING! These warnings must be followed, failure to do so may cause personal injury or may damage the wheelchair.

PROHIBITED! Prohibited actions must never be per- formed. Performing an action that is prohibited can cause personal injury or may damage the wheelchair.

Q-NOTE:Q-Notes are informative statements to help further explain actions, warnings or product detail.

ESD: Electrostatic Discharge has a potential to dam- age printed circuit boards unless handled cor- rectly. When the ESD symbol is shown through- out the owner manual, use the Proper Handling Techniques Insert supplied with the chair to properly handle printed circuit board.

V. EMI (ELECTROMAGNETIC INTERFERENCE)

WARNING

Heed all warnings to reduce the risk of unintended brake release or chair movement:

1.Beware of the danger from hand-held transceivers. Never turn on or use a hand-held transceiver while power to your chair is on. Use extra care if you believe that such a device may be in use near your chair.

2.Be aware of nearby radio or TV stations, and avoid coming close to them.

3.If unintended movement occurs, turn your chair off as soon as it is safe to do so.

V. EMI (ELECTROMAGNETIC INTERFERENCE

A. WHAT IS EMI?

WARNING

1.EMI means: electromagnetic (EM) interference (I). EMI comes from radio wave sources such as radio transmitters and transceivers. (A “transceiver” is a device that both sends and receives radio wave signals).

2.There are a number of sources of intense EMI in your daily environment. Some of these are obvious and easy to avoid. Others are not, and you may not be able to avoid them.

3.Powered wheelchairs may be susceptible to electromagnetic interference (EMI) emitted from sources such as radio sta- tions, TV stations, amateur radio (HAM) transmitters, two way radios, and cellular phones.

4.EMI can also be produced by conducted sources or electro- static discharge (ESD).

5 932213 Rev. C