SuperWorkstation
DIMM Population Table
DIMM | DIMMs | DIMM Type (Reg.= | Speeds (in MHz) | Ranks per DIMM |
Slots per | Populated | Registered) |
| (any combination; |
Channel | per Channel |
|
| SR=Single Rank, |
|
|
|
| DR=Dual Rank, |
|
|
|
| QR=Quad Rank) |
|
|
|
|
|
2 | 1 | Reg. DDR3 ECC | 800,1066,1333 | SR, DR |
2 | 1 | Reg. DDR3 ECC | 800,1066, | QR |
2 | 2 | Reg. DDR3 ECC | 800,1066,1333 | SR, DR |
2 | 2 | Reg. DDR3 ECC | 800,1066 | SR, DR, QR |
|
|
|
|
|
Note 1: Due to OS limitations, some operating systems may not show more than 4 GB of memory.
Note 2: Due to memory allocation to system devices, the amount of memory that remains available for operational use will be reduced when 4 GB of RAM is used. The reduction in memory availability is disproportional. (See the following Memory Availability Table.)
Possible System Memory Allocation & Availability
System Device
Firmware Hub flash memory (System BIOS)
Local APIC
Area Reserved for the chipset I/O APIC (4 Kbytes)
PCI Enumeration Area 1
PCI Express (256 MB)
PCI Enumeration Area 2 (if needed)
VGA Memory
TSEG
Memory available for the OS & other applications
Size
1 MB
4KB
2MB
4KB
256 MB
256MB
512MB
16MB
1MB
Physical Memory Remaining (with 4 GB of system memory installed)
3.99 GB
3.99GB
3.99GB
3.99GB
3.76 GB
3.51GB
3.01GB
2.85GB
2.84GB
2.84GB