Chapter 6: Advanced Chassis Setup
Figure 6-4. Removing a SAS/SATA Drive Carrier
Figure 6-5. Mounting a SAS/SATA Drive in a Carrier
! |
Important! Use extreme caution when working around the SAS/SATA back- plane. Do not touch the backplane with any metal objects and make sure no ribbon cables touch the backplane or obstruct the airflow holes.
SAS/SATA Backplane
The SAS/SATA drives plug into a drive backplane. A data cable for each drive and two LED cables need to be connected from the serverboard to the appropriate connectors on the backplane.
You cannot cascade the SAS/SATA backplane.