Chapter 5: Advanced Serverboard Setup
! |
Warning: You can only install the CPU to the socket in one direction. Make sure that the CPU is properly inserted into the socket before closing the load plate. If it doesn't close properly, do not force it as it may damage your CPU. Instead, open the load plate again and
7.With the CPU in the socket, in- spect the four corners of the CPU to make sure that they are flush with the socket.
8.Close the load plate. Lock the lever labeled 'Close 1st', then lock the lever labeled 'Open 1st'. Use your thumb to gently push the load levers down until the lever locks.
Gently close the load plate.
Push down and lock the level labeled 'Close 1st'.
OPEN1st
Lever Lock
OPEN1st
Push down and lock the lever labeled 'Open 1st'.