Manuals / SUPER MICRO Computer / Computer Equipment / Switch

SUPER MICRO Computer 7047A-73, 7047A-T user manual Audio Conﬁguration

Models: 7047A-73 7047A-T

1 110

Download 110 pages 1.8 Kb

Page 89

Chapter 7: BIOS

All USB Devices

This feature enables all USB ports/devices. The options are Disabled and Enabled. (If set to Enabled, EHCI Controller 1 and Controller 2 will appear.)

EHCI Controller 1/EHCI Controller 2 (Available when All USB Devices is set to Enabled)

Select Enabled to enable Enhanced Host Controller Interface (EHCI) Controller 1/ Controller 2. The options are Disabled and Enabled.

Legacy USB Support (Available when USB Functions is not Disabled)

Select Enabled to support legacy USB devices. Select Auto to disable legacy sup- port if USB devices are not present. Select Disable to have USB devices available for EFI (Extensive Firmware Interface) applications only. The settings are Disabled, Enabled and Auto.

Port 60/64 Emulation

Select Enabled to enable I/O port 60h/64h emulation support for the legacy USB keyboard so that it can be fully supported by the operating systems that does not recognize a USB device. The options are Disabled and Enabled.

EHCI Hand-Off

This item is for operating systems that do not support Enhanced Host Controller Interface (EHCI) hand-off. When enabled, EHCI ownership change will be claimed by the EHCI driver. The options are Disabled and Enabled.

Audio Conﬁguration

Azalia HD (High Deﬁnition) Audio

Select Enabled to enable support for Azalia High Deﬁnition Audio. The options are Enabled and Disabled.

Azalia Internal HDMI Decode

Select Enabled to enable support for Azalia High Deﬁnition Muliti-Media Interface Decode. The options are Enabled and Disabled.

7-15

Image 89

SUPER MICRO Computer 7047A-73, 7047A-T user manual Audio Conﬁguration

Contents

Super Manual Revision 1.0a Release Date August 17 Manual Organization PrefaceAbout This Manual System Safety Preface Table of Contents System Interface Advanced Chassis Setup Overview Chapter IntroductionProcessors Memory Serverboard FeaturesOnboard SAS 7047A-73 only PCI Expansion SlotsChassis Features Intel C602 Chipset System Block Diagram Headquarters Contacting SupermicroEurope Asia-PaciﬁcPage Unpacking the System Chapter InstallationPreparing for Setup Choosing a Setup Location Rack Mounting Considerations Ambient Operating TemperatureIdentifying the Sections of the Rack Rails Installing the System into a RackPreparing to Install the Chassis Rails Installing the Chassis RailsInstalling the Rails to the Chassis Installing the Rack RailsInstalling the System into a Rack Installing the System into the RackPage Reset PowerChapter System Interface Control Panel ButtonsOverheat/Fan Fail Control Panel LEDsDrive Carrier LEDs Power FailPage Electrical Safety Precautions Chapter System SafetyGeneral Safety Precautions ESD Precautions Installing the Onboard Battery Operating PrecautionsChapter Advanced Serverboard Setup Unpacking Serverboard InstallationConnecting Data Cables Connecting CablesConnecting Power Cables Connecting the Control PanelI/O Ports Control Panel Header PinsInstalling an LGA 2011 Processor Processor and Heatsink InstallationGently push down to pop the load plate open Lever Lock Top View Installing a CPU HeatsinkSide View Bottom ViewRemoving the Heatsink Installing & Removing DIMMs Installing Memory ModulesProcessor and Memory Module Population Processors and their Corresponding Dimm SlotsRdimm Memory Support Udimm Memory Support1DPC/2DPC Lrdimm Memory SupportDimm Adding PCI Add-On Cards Installing an Add-on Card4a. X9DA7 Layout Serverboard DetailsX9DAi X9DA7/X9DAi Quick Reference Jumper Description Default SettingConnector Description Description State Status Standby PWR LED Green On SB Power OnMain ATX Power Supply Connector Connector DeﬁnitionsProcessor Power Connectors Power ButtonChassis Intrusion Power On LEDOverheat/Fan Fail LED OH Internal Speaker Power LED/SpeakerFan Headers TPM Header/Port Standby Power HeaderPower SMB I2C Connector Sgpio Header Ieee 1394a1/ 1394a2 ConnectorsDOM Power Connector Simbmc Slot SPDIFIn/SPDIFOut HeadersCmos Clear Jumper SettingsExplanation of Jumpers Watch Dog Enable/Disable Glan Enable/DisableIeee 1394a Enable/Disable Write Protect Enable/DisableJtag Scan Manufacture ModeSMB Enable/Disable LAN1/2 LEDs Onboard IndicatorsOnboard Power LED SAS2 Ports SAS and Sata PortsSata Ports Installing Software SuperDoctor Supero Doctor III Interface Display Screen Remote Control Page Chapter Advanced Chassis Setup Chassis Front View Front Control Panel Overheat/Fan Fail Power FailReplacing Chassis Cooling Fans System FansFan Failure Removing a Chassis Fan Installing/Removing SAS/SATA Drives Drive Bay InstallationRemoving a SAS/SATA Drive Carrier SAS/SATA BackplaneRemoving the Empty Drive Bay Installing Components in the 5.25 Drive BaysPower Supply Failure Power SupplyPage Introduction Starting Bios Setup UtilityChapter Starting the Setup Utility Main SetupHow To Change the Conﬁguration Data SMC Version System Date/System TimeSMC Build Date Memory Information Total MemoryXBoot Features Advanced Setup ConﬁgurationsXSocket 0 CPU Information/Socket 1 CPU Information Power ConﬁgurationCPU Conﬁguration 64-bit CPU SpeedHyper-threading Active Processor CoresL1 Data Prefetch Available when supported by the CPU Hardware Prefetcher Available when supported by the CPUDCU Streamer Prefetcher Available when supported by the CPU DCU IP PrefetcherPower Technology Xcpu Power Management ConﬁgurationTurbo Mode EuPLong Duration Power Limit Factory Long Duration Power LimitRecommended Short Duration Power Short Duration Power LimitXioh Conﬁguration XChipset Conﬁguration XNorth BridgeXqpi Conﬁguration Current Memory Mode QPI Quick Path Interconnect Link Speed ModeMemory Mode QPI Link Frequency SelectPerfmon and DFX Devices Dram Rapl ModeMpst Support DDR SpeedXSouth Bridge Conﬁguration Audio Conﬁguration Xsata Conﬁguration XPCIe/PCI/PnP Conﬁguration Xscu ConﬁgurationMaximum Payload SERR# GenerationMaximum Read Request Aspm SupportXSuper IO Conﬁguration XConsole Redirection SettingsXSerial Port 0 Conﬁguration XSerial Port Console RedirectionBits Per second Terminal TypeData Bits ParityResolution Recorder ModeLegacy OS Redirection Putty KeypadCPU Temperature Display Mode Fan Speed Control ModeCPU 1 Temperature/CPU 2 Temperature XHardware Health ConﬁgurationXacpi Setting XTrusted Computing Available if a TPM device is installed Event Logs XChange Smbios Event Log SettingsWhen Log is Full Erasing Settings Erase Event LogSmbios Event Log Standard Settings Log System Boot Event View Smbios Event LogNetwork Device BBS Priorities, Hard Drive BBS Priorities BootXDelete Boot Option Security Administrator PasswordUser Password Save & Exit Save Changes and ResetDiscard Changes and Exit Save Options Save ChangesSave as User Defaults Restore DefaultsRestore User Defaults Boot OverrideBeep Code/LED Appendix a Bios Error Beep CodesError Message Page Appendix B System Speciﬁcations BiosWeight Appendix B System Speciﬁcations