Chapter 5: Advanced Serverboard Setup
TPM Header/Port 80
A Trusted Platform Module/Port 80
TPM/Port 80 Header
Pin Definitions
header is located at JTPM1 to provide TPM support and Port 80 connection. Use this header to enhance system performance and data security. See the table on the right for pin defini- tions.
Pin # Definition
1 | LCLK |
3 | LFRAME# |
5 | LRESET# |
7LAD 3
9+3.3V
11 LAD0
13SMB_CLK4
15+3V_DUAL
17 | GND |
19 | LPCPD# |
| Pin # Definition |
2 | GND |
4 | <(KEY)> |
6 | +5V (X) |
8LAD 2
10LAD1
12 GND
14SMB_DAT4
16SERIRQ
18 CLKRUN# (X)
20 LDRQ# (X)
Standby Power Header
The Standby Power header is located at STBY1 on the serverboard. See the table on the right for pin definitions.
Power SMB (I2C) Connector
Power System Management Bus (I2C) Connector (JI2C1) monitors power supply, fan and system temperatures. See the table on the right for pin definitions.
IPMB
A System Management Bus header for IPMI 2.0 is located at JIPMB. Connect the appropriate cable here to use the IPMB I2C connection on your system.
Standby Power
Pin Definitions
Pin# Definition
1+5V Standby
2Ground
3
PWR SMB
Pin Definitions
Pin# Definition
1Clock
2Data
3PWR Fail
4Ground
5+3.3V
IPMB Header
Pin Definitions
Pin# Definition
1Data
2Ground
3Clock
4No Connection