Chapter 2: Installation

USB Wake-Up

JPUSB1 jumper allows you to "wake up" the system by pressing a key on the USB keyboard or by clicking the USB mouse of your system. These jumpers are used in conjunction with the USB Wake-Up function in the BIOS. See the table on the right for jumper settings and jumper connections. (the default is Enabled)

Backpanel USB

Wake-Up Enable (JPUSB1)

Jumper Settings

Jumper Setting

Definition

 

 

Pins 1-2

Enabled (default)

 

 

Pins 2-3

Disabled

 

 

BMC Jumper

JPB1 is used to enable or disable theBMC (Baseboard Management Control) Chip and the onboard IPMI connection.This jumper is used together with the IPMI settings in the BIOS. The default position is on pins 1 and 2 to Enable BMC. See the table on the right for jumper settings.

BMC Jumper Enable (JPB1)

Jumper Settings

Jumper Setting

Definition

 

 

Pins 1-2

Enabled (default)

 

 

Pins 2-3

Disabled

 

 

2-19

Page 41
Image 41
SUPER MICRO Computer H8QG6+-F, H8QGI+-F user manual USB Wake-Up, BMC Jumper