Suunto t3d manual Using Training Mode, Putting on your transmitter belt

4 USING TRAINING MODE

en

The TRAINING mode handles measurement of all your training activity.

NOTE: Even though both Suunto t3d and the transmitter belt are water-resistant, the radio signal does not carry in water, which makes the communication between Suunto t3d and the transmitter belt impossible.

4.1 Putting on your transmitter belt

Put on the belt as illustrated and switch to TRAINING mode to start monitoring your heart rate. Moisten both contact areas (1) with water or gel before putting the belt on. Ensure the belt is centered on your chest.

17