To set the position format:
1.In the Set menu, scroll to Units and press ENTER. The Units menu is displayed.
2.Scroll to Position and press ENTER.
3.Select the desired format with UP/DOWN and press ENTER. The position format is now set.
The following table shows you the possible position formats and whether they use a datum or a grid.
Pos. format | Datum | Grid |
|
|
|
|
|
|
Deg | Set | No adjustment required |
|
|
|
Dm | Set | No adjustment required |
|
|
|
Grid | No adjustment required | Set |
|
|
|
UTM | No adjustment required | No adjustment required |
|
|
|
Set: This means that you have to set the correct datum/grid.
No adjustment required: This means that this selection does not have any effect so you do not have to adjust it.
23
