SVAT Electronics 2CV500 - 4CH Recording Setup, Resolution, To Change the Normal Record PPS

MAIN MENU...continued

RECORDING SETUP

1.Access the Main Menu.

2.Select the Motion Setup icon.

RESOLUTION:

You can set the resolution to:

NTSC Mode

1.720 x 240 (max 60 PPS)

2.360 x 240 (max 120 PPS)

PAL Mode

1.720 x 288 (max 50 PPS)

2.360 x 288 (max 60 PPS)

Note: NTSC video standard is the video standard for North America. Europe and other countries use the PAL video standard. NTSC videos or cameras will not work on PAL television sets or monitors.

Changing the resolution will affect the picture quality. A higher resolution will produce a better quality picture; however, footage recorded in a higher resolution will take up more space on the hard drive. The higher the resolution causes the maximum number of PPS (pictures per second) be lowered.

PPS

PPS stands for Pictures Per Second and refers to how many pictures will be captured in 1 second. The more PPS, the smoother the video, and the less PPS the more choppy the video will appear.

Normal record PPS will adjust the PPS for full record and manual record mode.

Alarm record PPS will adjust the PPS for motion detection and external alarm detection. Generally the normal record PPS will be lower to minimize the amount of HDD space used when non-important events are happening and the alarm record PPS is higher to use smooth video recording when motion or alarms are triggered.

To Change the Normal Record PPS:

1.Select to set the Normal Record PPS.

2.Use the mouse wheel or the directional buttons to adjust the PPS.

3.When in 720 x 240, you can change each camera’s PPS.

4.When in 360 x 240 The Normal PPS for CH1 and CH2 will change together, as will CH3 and CH4.

5.Press ENTER or select to save settings and return to Record Setup Menu.

6.Exit the record setup Menu to save changes.

7.Exit the Main Menu . The DVR will take a few moments to load the settings.

CV500 - 4CH 22