SVAT Electronics 2CV500 - 4CH Network Setup, To Setup the Password Protect, To Format the HDD

MAIN MENU...continued

To Setup the Password Protect:

1.Select HDD PASSWORD PROTECT.

2.Use the mouse wheel or directional keys to change from disable to enable. This will require the HDD password setup to be entered before accessing the HDD format Menu while enabled.

The next step is to choose a password for the HDD format protection. The default password is the same as the default password for the DVR: 1111. It is recommended that the DVR Menu password and the HDD password be changed and different from the menu password. This way someone can access the DVR Menu, but not the HDD Menu.

3.Select to enter the HDD password Setup Menu.

4.Highlight the number to change and use the mouse wheel or directional keys on each number to change to the new password.

5.	Press Menu or select the	to exit the HDD Password Setup.
6.	Press Menu or select the	to exit the HDD Management Menu.
7.	Press Menu or select the	to exit the Main Menu and save your settings. The DVR may take a few moments to load the settings.

To Format the HDD:

1.Select HDD FORMAT SETUP.

2.Select to enter the HDD FORMAT SETUP Menu.

3.Use the mouse wheel or directional keys to change from DISABLE to ENABLE.

4. Select to format your HDD.

5.You will be prompted to ensure that you really want to format the hard drive.

6.Select YES to format the hard drive, or NO to exit the Menu and not delete the stored footage. The selected button will looked as if it is pressed in.

7.	Press Menu or select the	to exit the HDD Management Menu or press the Menu button.
8.	Press Menu or select the	to exit the Main Menu.
	This will not erase any of your DVR settings.

NETWORK SETUP

1.Access the Main Menu by pressing Menu or by using the Pop Up Menu Bar. Move the mouse to the bottom of the display screen to reveal the Pop Up Menu.

2.Select the Menu icon .

3.Select the NETWORK setup icon .

The network setup Menu is your gateway to viewing your footage online. This Menu holds the information you need about your DVR to set up on-line viewing. Note that for basic network setup, the values shown on the screen are the values you will be using, and that you will not need to set new values.

The Next Page has a quick description of the network setup Menu items.

CV500 - 4CH 30