9
INSTALLING THE HANDSET BATTERYPACK
1) Remove the handset battery cover
by pressing in on the cover release
and sliding it downward.
2) Connect the battery pack connector
with the correct polarity (black and
red wires), then insert the battery
pack into the battery compartment.
NOTE: The plastic connectors will fit
together only one way. Make
sure the battery’s connector is
properly aligned. Use only the
supplied battery pack (model
BT-905).
3) Slide the battery cover on until it
snaps into place.
Red
Red
WireBlack
Wire
Black
UP044DH (ST88245) OM resize 3/4/04 3:04 PM Page 9