7)Press MEM. The handset beeps and displays the confirmation screen. Memory storage is complete. For example, if you store a name and number into memory location number 7, the display shows “Memory07 Stored”. If you store only the number into memory location number 8, the display shows “<Memory08>”. After about 2 seconds, Select Memory screen is displayed.
Repeat steps 2 - 7 to store more numbers.
8)Press END to return to standby mode.
M e m o r y 0 7 S t o r e d
0 7 
S O N I G E M
0 8 < M e m o r y 0 8 > 0 9
NOTE: You must press a key within 30 seconds or the phone will return to standby. If you return the handset to the base, the phone will return to standby also.
STEPS FOR ENTERING NAMES AND SPECIAL CHARACTERS
Refer to the letters on the number keys to select the desired characters. With each press of a numeric key, the displayed character appears in the following order:
Upper case letters first, lower case letters next, and finally the number corresponding to the key.
16
