MEMORY DIALING
STORING PHONE NUMBERS AND NAMES
Memory Dialing allows you to dial a number using just a few key strokes. Your ST88245 stores up to 10 names/numbers in the handset.
1)Press MEM then “Select Memory” is displayed.
2)Press /VOL and /VOL, or enter a number (0 - 9) to select the memory location where you would like to store the number.
3)Press SELECT twice. The following screen appears and a cursor flashes indicating that the display is ready for the name to be entered.
If this screen appears, the selected memory location is already stored. Then you must either change the entry in this location, clear the entry in this location, or select “Go Back” to choose another location.
S e l e c t M e m o r y
0 1
0 2
S t o r e N a m e
E d i t M e m o r y 0 2
D e l e t e M e m o r y 0 2 G o B a c k
4)To enter a name (up to 13 characters), use the number keys.
•See the “Steps for entering names and special characters” (See page 16).
• Use #/ and /TONE/ to move the cursor to the desired location.
•Use CH/DELETE to delete characters as needed.
•Press and hold CH/DELETE to delete all the characters.
•If a name is not required, go to step 5.
5)Press SELECT. “Store Number” is displayed. The cursor flashes indicating
that the display is ready for the number to be entered.
6)Use the number keys, #/ or /TONE/ , to enter the phone number. The phone
number cannot exceed 20 digits.
Use PAUSE/REDIAL to enter a pause in the dialing sequence.
The display shows a “P”. Each pause counts as one digit and represents a two second delay of time between the digits as they are sent.
Use CH/DELETE to delete digits as needed.
NOTE: The pause feature is useful for long distance calling, credit card dialing, or |
|
sequences that require a pause between digits. | 15 |
|