8
2) Plug one end of the supplied
modular cord into the TELLINE
jack on the base’s back.
3) Plug the supplied AC adapter's
barrel plug into the DC IN 9Vjack.
4) Route the adapter and modular
cords through the bracket’s grooves.
5) For a wall plate, align the bracket’s
keyhole slots with the wall plate
studs and slide the base downward
to secure it.
For direct wall mounting, align the
bracket’s keyhole slots with the
mounting screws and slide the
base downward to secure it.
6) Plug the adapter into a standard
AC outlet. And plug the modular
cord’s other end into a modular
phone line jack.
▼Installing the Optional Beltclip (not included)
To attach the beltclip
Insert the beltclip into the holes on each side of the handset. Press down
untilit clicks.
To remove the beltclip
Pull both sides of the beltclip to release the tabs from the holes.
▼Connecting/Charging the Battery Pack
The phone comes with a rechargeable nickel-cadmium battery pack in the
handset, but not connected. Before using your phone, you must connect
the battery pack. Then charge it for about 15–20 hours.
TEL LINE
DC IN 9V
UP044DH (ST88245) OM resize 9/15/04 2:20 PM Page 8