Chapter 12 Troubleshooting
3 Gently pull the jammed paper out of the printing compartment.
4 Replace the imaging film, making sure that the flange goes into the rear slot on the left side of the printing compartment. Also, make sure that the right, rear gear engages with the gear below it.
5 Wind the film slightly (rotate the gear on the right side of the rear spool) so that there is no slack in the film. Make sure that both edges of the film wind onto the spool evenly.
6 Close the print compartment cover, mak- ing sure it clicks into place.
•Caution! Close the cover slowly to make sure it doesn’t pinch your fin- gers.
92
