Sharp UX-600M operation manual Connections, AC outlet

Models: UX-600M

1 118
Download 118 pages 25.84 Kb
Page 18
Image 18

Chapter 1 Installation

Connections

Connect the power cord, telephone line cord, and handset as shown below. If de- sired, you can also connect an answering machine or an extension telephone to your fax.

Connecting an answering machine to the fax will allow you to receive both voice and fax messages on the same line while you are out. For details on using this feature, see Chapter 7. (Note: Do not connect an answering ma- chine to your fax if you will be using the distinctive ring feature described in Chapter 2.)

You can connect an extension phone to the fax to make and receive calls like any other extension phone on your line. For details on receiving faxes from an extension phone, see Chapter 4, "Receiving Documents".

1 Plug the power cord into a 120 V,

AC outlet

60 Hz, grounded (3-prong) outlet.

 

Caution: Do not plug the power

 

cord into any other kind of outlet.

 

This will damage the machine and

 

is not covered under the warranty.

Answering

 

machine

2 To connect an answering machine or extension phone to the fax, first remove the seal covering the TEL.

SET jack on the fax, and then insert the line for the answering machine or the extension phone into the TEL. SET jack. For an answering machine, the other end of the line should be connected to the answer- ing machine’s telephone line jack, not its extension phone jack.

If desired, you can connect an answering machine to the fax first, and then connect an extension phone to the answering ma- chine’s extension phone jack.

Extension telephone

EXT.

PHONE TEL.

LINE

6

Page 18
Image 18
Sharp UX-600M operation manual Connections, AC outlet