Sharp UX-600M operation manual Setting the Date and Time

Chapter 2 Initial Settings

Setting the Date and Time

The date and time appear in the display and reports, and are printed at the top of every page you transmit. Set the date and time by pressing the keys on the opera- tion panel as shown below.

♦To correct a mistake, press the SPEED DIAL key to move the cursor back to the mistake, and then enter the correct number.

1 Press the FUNCTION key and then the "3" key. ENTRY MODE will appear in the display.

FUNCTION

3

2 Press the "*" key three times.

DATE & TIME SET will appear in the display.

3 Press the START key.

START

4	Enter a two-digit number for the month	0	1
	("01" for January, "02" for February,
	"12" for December, etc.).			(Example: January)
5
	Enter a two-digit number for the day	0	5
	("01" to "31").
				(Example: the 5th)
6 Enter the last two digits of the year.		9	7
	(Note: In the year 2000, "00" will appear
	for the year.)			(Example: 1997)
7
	Enter a two-digit number for the hour	0	9	2	5
	("01" to "12") and a two-digit number

for the minute ("00" to "59"). (Example: 9:25)

21