Sharp UX-600M Installing the Multifunction Interface Software, Windows 3.1 or higher users

Chapter 1 Installation

Installing the Multifunction Interface Software

The Multifunction Interface software allows you to perform fax operations from your computer and lets you use your fax as a scanner and printer. Install the soft- ware from your Sharp Multifunction Interface CD-ROM.

♦You must be running Microsoft Windows(TM) 3.1 or higher, or Windows ’95 to install the Sharp Multifunction Interface as a Windows application.

♦For general information on installation and management of Windows’ appli- cations, refer to your Microsoft Windows User’s Guide.

To install the Multifunction Interface software, follow these steps:

1 Make sure your fax is connected to your computer via the PC Interface box as described in "Connections" in this chapter.

2 Make sure your fax is powered on (plug in the power cord).

3 Run Windows(TM) 3.1 or higher, or Windows ’95.

4 Close any other Windows applications which may be running.

5 Insert the Sharp Multifunction Interface CD in your computer’s CD-ROM drive. (Note: Some systems automatically install the software when the CD is inserted in the CD-ROM drive. Advance to Step 7 if your system automat- ically installs the Multifunction Interface software.)

6 Windows 3.1 or higher users:

Select the Windows Program Manager.

Select the File drop-down menu and select the Run command. The command screen will appear, displaying the command line. At the command line, type the letter of your CD-ROM drive followed by Install.exe, and click OK.

Windows ’95 users:

Select Start, and select Run. At the command line, type the letter of your CD- ROM drive and then click OK. Double click on the Install.EX E icon in the window that appears.

♦If you have previously installed the Sharp Multifunction software, an open- ing screen will appear. Select the Install Sharp button.

9