22
FINISHING
GLASS DOOR INSTALLATION AND REMOVAL
1.Lift the top cast piece off of the unit.
2. Pull handle forward and rotate 90º to unlatch the door. | FIGURE41a |
Figure 41a. |
|
3. Lift door straight up to remove. Figure 41b. |
|
| 90° |
FIGURE41bDOOR
LOGO PLACEMENT
Remove the backing from the logo and position onto the control door as shown.
1/2”
LOGO
FIGURE 42
1/2”
DOOR GLASS REPLACEMENT
1. Place the door frame face down careful not to scratch the paint.
2. Center the gasketed glass inside the door frame with the thick side of the gasket facing up.
3. Bend the glass retainers located along the edge of the door frame over the gasket holding the glass in place. Careful not to break the glass.
DOOR | GLASS | |
FRAME | ||
RETAINERS | ||
|
GASKET
FIGURE43
GLASS
NOTE: Care must be taken when removing and disposing of any broken glass or damaged components. Be sure to vacuum up any broken glass from inside the stove before operation.