Chapter 1 Installation

9 Close the print compartment cover, mak- ing sure it clicks into place.

Caution! Close the cover slowly to make sure it doesn’t pinch your fingers.

10 If you replaced the film, initialize the

 

 

new film by pressing the FUNCTION

 

 

key, the "6" key, and the "#" key on the

FUNCTION

operation panel. Make sure that INITIAL-

 

6

 

IZE FILM appears in the display, and

 

 

then press the START key. (Do not per-

 

 

form this step if you installed the initial

 

 

sample roll of film.)

 

START

When to replace the imaging film

The sample roll of imaging film provided with your fax is capable of printing ap- proximately 65 pages of letter size paper. When it is used up, FILM END will appear in the display. Replace it with the following imaging film, which is avail- able at your dealer or retailer.

UX-15CR Imaging Film

One roll of UX-15CR imaging film is capable of printing approximately 500 pages of letter size paper when printed continuously.

Caution!

The text of documents printed with the imaging film is visible on the used film. If confidential information has been printed, dispose of the film appropriately.

5

Page 17
Image 17
Sharp UX-600M operation manual When to replace the imaging film, UX-15CR Imaging Film