Sharp UX-600M operation manual Receiving Documents, Loading paper

Quick Reference Guide

Receiving Documents Installing the imaging film

Press the RECEPTION	RECEPTION
	MODE
MODE key until "AUTO"
or "MANU" appears in the
display.

AUTO reception: The fax will automatically an- swer after four rings and receive the incoming document.

MANUAL reception: Lift the handset when the fax rings. If you hear a fax tone, wait until RECEIVING appears in the display, then hang up (if RECEIVING doesn’t appear, press the START key). If the calling party talks to you, press your START key to begin reception.

(See Pages 42-43 of your manual.)

1. Press the release marked OPEN and open the print com- partment cover.

2. Insert two of the gears into the ends of the spool with film.

3. Hold the empty spool so that the end with only one slot is on the left, and lower the spools into the printing compartment so that the gears fit into the slots on each side of the compartment.

Loading paper

1.Insert the paper tray into the fax if not yet in- stalled.

2.Remove the paper cover if it is on the tray. (For legal paper, flip up the tray externder.)

3.Pull the paper release

plate toward you.

♦If any paper remains in the tray, take it out

and combine it into a single stack with the new paper.

4. Insert the stack of paper into the tray. Replace the tray cover and then push the paper release plate back down.

LETTER LEGAL

4. Cut the band holding the spools together with scissors, and re- move it. Insert the re- maining gear into the right end of the empty spool and the flange into the left end of the empty spool.

5. Pull the empty spool to- ward the back of the compartment, unwind- ing the leader from the spool with film. Insert the empty spool into the compartment so that the gear and spool fit into the slots on each side of the com- partment.

6. Wind the film slightly to remove slack and then close the printer compartment

5. Press the following sequence of keys:

FUNCTION

6

Press "1" if you loaded letter size paper, or "2" if you loaded legal size paper.

cover.

7.If you replaced the film, press the following sequence of keys (this is not necessary for the sample film included with the fax):

When finished, press:

STOP

FUNCTION START

6

(See pages 13-14 of your manual.)

(See Pages 2-5 of your operation manual.)