Chapter 3 Sending Documents
Optional Transmission Settings
If desired, there are several transmission settings which are possible before dial- ing and transmitting the document.
Note: To make the settings, the document must first be loaded in the feeder.
Resolution
Your fax has 4 resolution settings. If you do not make a setting, the fax will auto- matically send the document in STANDARD resolution.
STANDARD: | Use STANDARD for ordinary documents. This setting |
| gives you the fastest and most economical transmission. |
FINE: | Use FINE for improved reproduction, especially with |
| documents containing small letters or fine drawings. |
SUPER FINE: | Use SUPER FINE when you need the highest quality of |
| reproduction. |
HALF TONE: | Use HALF TONE for photographs and illustrations. The |
| original will be reproduced in 64 shades of gray. |
Note: In order to transmit in SUPER FINE resolution, the receiving fax ma- chine must also have that resolution. If it doesn’t, your fax will automatically step down to the next best available setting.
Contrast
The contrast is normally set to AUTO, which means that the fax automatically controls the contrast, but for faint documents you can change the setting to DARK.
Setting the resolution and contrast
Press the RESOLUTION key one or more times until the desired resolution and contrast settings appear in the display.
•The first time you move through the list of resolution settings, the contrast set- ting AUTO will appear next to each resolution setting. The second time you move through the list, the contrast set- ting DARK will appear.
RESOLUTION
34
