8-16
PPT 2700 Series Product Reference Guide
Options Property Page
The Options page controls system sounds and whether specified settings are temporary.
Figure 8-13. Options Property Page

Enable System Sounds

You can enable or disable NICTT system sounds. NICTT uses standard wav-table sounds
supplied by the Windows operating system. NICTT plays a wav file when it detects the PPT
2746 roaming between APs, and also when it pings a host computer.
You may change NICTT wave files using the Windows Control Panel Sounds applet. There
are two entries for NICTT: Spectrum24 NICTT Ping and Spectrum24 NICTT Roam. Select
a wave file in the Sounds window for the audible response tone. The standard wave files
shipped with NICTT have the following format:
SSxxxn.wav
Where xxxx is either ping or roam and n is the identity of the file.