10-9
Configuring the Terminal
To build a script:
1. In the Script Window, select the script to be built.
2. From the Script menu, select Build.
OR
On the toolbar, choose . The Configure Build window appears.
3. Select whether to build the partition table, or one volume.
4. Select ASCII format for your hex image, or Compression, which reduces the size of
most hex images in order to speed downloading. Click OK.
5. TCM performs a check. If the script is has no errors, TCM proceeds with the build.
If the Build Fails
If the build fails, TCM displays a message indicating which file(s) are missing.
If the total amount of flash required by the script exceeds the image size, a TCM error results.
To correct this, reduce the number of files in the volume, or make the disk non-bootable.
Refer to Defining Script Properties on page 10-4 for more information on setting the image
size appropriately.