8-22
PPT 2700 Series Product Reference Guide
Power Prop ert ies
Select the Power tab in the Advanced Properties window to display the Power Settings
property page. Use the Power property page to control terminal power consumption.
Figure 8-18. Power Property Page
There are two power consumption modes: Continuous Access Mode and Power Save Poll
mode. CAM yields the best performance but uses the most power. CAM is the preferred mode
for systems running on AC power. PSP saves significant amounts of power over CAM. P SP is
the preferred mode for systems running on battery power.
Set the slider to the far right to retain CAM or set the slider to a PSP performance index (1
to 5). Each mode is described underneath the sliding scale.
Note: You must disable the Power Management capabilities in NICTT to
use the settings in the NCPA Power property page.